|
Aftercare & Warranty
We offer high quality products and a comprehensive
and extensive range of warranties.
To ensure these warranties are maintained for the
duration of the warranty period it is essential that
good housekeeping and basic maintenance procedures
are carried out. Below are highlighted these requirements
to ensure the warranties are not compromised.
WARRANTY
All the PVCU profiles used in the manufacture of the
composite door range are guaranteed for 10 years against
discoloration and structural degradation
AFTERCARE All the PVCU profiles used in the manufacture
of the composite door range should
be cleaned regularly with warm soapy water. It is
acceptable to periodically use a very light abrasive
cleaner (as used for acrylic baths) for the removal
of ingrained dirt and grease. This cleaning material
however should not be used frequently.
WARRANTY
All the insulated glazing units used in the manufacture
of the composite door range is guaranteed for 10 years
against the hermetic seal failing.
AFTERCARE Glass should be cleaned with a proprietary
glass cleaning liquid or soapy and clean water. Care
should be taken when cleaning resin bead and coloured
areas.
WARRANTY
All fittings, locks and ironmongery used in the composite
door range are guaranteed for 2 year against manufacturing
fault failure.
AFTERCARE All moving parts should be lightly oiled
regularly and door locks oiled where indicated on
the lock face. Handles should be cleaned using the
same procedure as for the PVCU profiles. NOTE! As
the most common fault of locking mechanism failure
is due to poor aftercare the above should be strictly
adhered to or your warranty could become invalid.
Testing & Accreditations
It is vital that our customers have complete confidence
in every product we produce and to this end we are
rigorous control system in place, constantly checking
our products at each stage of the production process.
We also insist that every product is subjected to
the most comprehensive and exacting range id in-house
independent tests available.
Our products not only meet the requirements necessary
for accreditation, but in the overwhelming majority
of cases they exceed them.
Along with the many kite marks we hold, we are proud
to be a secure by design licensed holder (with laminated
glass option) the police initiative to 'design out
crime'.
Our doors are also available to order complete with
Part M compliance, so meeting the demands of the Disability
Discrimination Act is not a problem.
www.bespoke-composite-doors.co.uk
|